Bigsby USA B5 Gold - Left Hand

2.163,-

Original USA-produsert LEFT HAND Bigsby® tremolo. Normalt brukt på solid body gitarer som Les Paul® Special, Tele®, SG, etc. Bridge ikke inkludert.

Bigsby GRETCH USA B6 - gull

2.456,-

Original USA-produsert Gretch logo Bigsby® tremolo med .  Bridge ikke inkludert. Gold finish   A Bigsby® equipped guitar will give you the expressive, fluid sound that only a true Bigsby vibrato can produce. The go-to choice for guitar players looking for unparalleled performance and vintage style, a Bigsby vibrato delivers smooth and accurate pitch changes, allowing you to create subtle vibrato effects. Its classic look and easy installation make it a popular choice for both guitarists and luthiers alike. Discover the Bigsby sound and take your playing to the next level. The B6™ is a longer version of a B3™ and commonly used with larger archtops including Gretsch 6120 models. The Gretsch® branded Bigsby is featured on many Pro Series Gretsch guitars. The lack of a tension bar creates a shallower break angle over the bridge for a softer string feel.

Bigsby USA B6 Left Hand - gull

2.434,-

Original USA-produsert Bigsby® tremolo. Brukes for store Hollowbody gitarer som  f.eks. Gretsch® 6120 og Gibson® Super 400  Series: Original Kalamazoo Line Manufacturing Method: Sand Cast Manufacturing Material: Aluminum Approximate weight: 311 grams/11 oz. Overall Length: 9 1/4”/235 mm Overall Width: 3 5/8”/ 92.1 mm  Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench

Bigsby USA B11

1.975,-

Original USA-produsert Bigsby® tremolo. Normalt brukt på arch top gitarer. Bridge ikke inkludert.

Bigsby USA B11 - gold

1.875,-

Original USA-produsert Bigsby® tremolo. Normalt brukt på arch top gitarer. Bridge ikke inkludert. Gold finish.

Bigsby USA B12

1.975,-

Original USA-produsert Bigsby® tremolo. Brukes på både flat top og arch top gitarer. Bridge ikke inkludert.

Bigsby hengsleskrue - rustfritt stål

13,-

Bigsby tremolobolt i rustfritt stål.

Bigsby lager for roller

29,-

Lager for roller til Bigsby tremoloarm.

Bigsby mutter for tremoloarm

13,-

Mutter for Bigsby tremoloarm.

Bigsby roller

78,-

Roller i rustfritt stål for Bigsby tremolo.

Bigsby roller pin

30,-

Pin for roller til Bigsby tremolo.

Bigsby settskrue for tremoloarm

26,-

Settskrue for Bigsby tremoloarm.

Bigsby Sorkin Bowtie Bridge - krom

329,-

Bigsby® bridge fra 1950 tallet. Denne typen fins på tidlige Premier® gitarer og noen Rickenbacker® modeler. Autentisk Bigsby® del stemplet med MADE IN THE USA på undersiden. John Lennon hadde en slik på sin første 325 Rickenbacker.  

Bigsby Chet Atkins 7 in. Replacement Handle - krom

204,-

Bigsby Chet Atkins 7 toms arm i krom finish.

Bigsby tremoloarm Chet Atkins - gull

585,-

Bigsby Chet Atkins arm i gull finish.

Bigsby Chet Atkins 10 in. Replacement Handle - gull

404,-

Bigsby Chet Atkins 10 in. Replacement Handle, gull finish

Bigsby brakett for Chet Atkins Replacement Handle - gold

578,-

Bigsby brakett for Chet Atkins Replacement Handle. Gold finish.

Bigsby brakett for Chet Atkins Replacement Handle - rustfritt st

455,-

Bigsby brakett for Chet Atkins Replacement Handle. Rustfritt stål

Bigsby tremolobolt - rustfritt stål

59,-

Bigsby tremolobolt i rustfritt stål

Bridge med 6 sadler for Bigsby

128,-

Forbedret og intonerbar bridge for Bigsby med 6 individuelt justerbare sadler. Viktige mål: Senter til senter stud spacing: 7,62cm (3 tommer). E til E string spacing: 56mm Strengeavstand: 11.2 mm som kan justeres pga sadlene har riller. Stud diameter: 1,19cm (15/32 tommer). Bøssing diameter: 10,71mm  

Pickup Plate Bigsby - krom

86,-

Plate for montering av Bigsby B5 eller B50 på Telecaster. Festeskruer følger med.

Bigsby 1 1/8 toms fjær - krom

63,-

Original Bigsby 1 1/8 toms (ekstra lang) tremolofjær. 

Bigsby USA tremoloarm - gold

625,-

Original Bigsby® USA  (Kalamazoo series) arm i gold finish med settskrue.

Hardwarekit for Bigsby - rustfritt stål

295,-

Originalt USA Bigsbyhardwarekit for tremoloer. Settet består av: Handle Stud Handle Spring Handle Nut Hinge Pin Roller Bearing Needle Bearing Dimensjoner:    Handle Nut Diameter   0.308 in. Handle Nut Height   0.189 in. Handle Nut U.S. Screw Number   8 Handle Nut U.S. Thread Major Diameter   0.164 in. Handle Spring   Length:0.359 in. Handle Stud Length   0.87 in. Handle Stud U.S. Screw Number   10 Handle Stud U.S. Thread Major Diameter   0.19 in. Handle Stud U.S. Thread Pitch   32 tpi. Hinge Pin Head Diameter   0.371 in. Hinge Pin Overall Length   0.1868 in. Hinge Pin Pin Diameter   0.173 in. Roller Bearing Diameter   0.377 in. Roller Bearing Height   0.249 in. Roller Bearing Shaft Diameter   0.187 in.

Skruesett for Bigsby - Rustfritt

106,-

Originalt Bigsby skruesett for montering av Bigsby tremoloer.  

Skruesett for Bigsby - gold

99,-

Originalt Bigsby skruesett for montering av Bigsby tremoloer. Genuine Bigsby® parts ­­­ - for pure Bigsby sound, feel and performance. Bigsby offers a wide selection of parts for players looking to restore or upgrade their vintage or contemporary instruments. A package of every screw needed for your Bigsby. Will work with most models. Includes: 4 x Body Mount Screws 2 x Set Screws 4 x Hinge Mount Screws  

Skruesett for Bigsby - Stål

66,-

Originalt Bigsby skruesett for montering av Bigsby tremoloer. Genuine Bigsby® parts ­­­ - for pure Bigsby sound, feel and performance. Bigsby offers a wide selection of parts for players looking to restore or upgrade their vintage or contemporary instruments. A package of every screw needed for your Bigsby. Will work with most models. Includes: 4 x Body Mount Screws 2 x Set Screws 4 x Hinge Mount Screws  

Bigsby® Extra Short Hinge kit - gold

328,-

Bigsby hengsle kit alu gold - xtra short. Standard på B3 og B7 men kan også brukes på B6.

Bigsby® Hinge kit standard - alu

266,-

Bigsby hengsle kit alu. Standard på B6

Bigsby® Hinge kit - gold

328,-

Bigsby hengsle kit alu gold. Standard på B6.

Bigsby fiberskive

10,-

Fiberskive for Bigsby tremoloarm.

TOWNER® DOWN TENSION BAR - RUSTFRITT STÅL

226,-

Towner® Down Tension Bar (DTB) er et skrueløst system som festes på Stop-Tail boltene. DTB gir V.S.T. [Variable String Tension] og lar deg kontrollere binkelen på strengene mellom bridge og og Bigsby ved å justere boltene til ønsket høyde når du bruker Bigsby® B3, B6, B11, B30 eller B60 vibrato tailpiece.

TOWNER® DOWN TENSION BAR - GOLD

339,-

Towner® Down Tension Bar (DTB) er et skrueløst system som festes på Stop-Tail boltene. DTB gir V.S.T. [Variable String Tension] og lar deg kontrollere binkelen på strengene mellom bridge og og Bigsby ved å justere boltene til ønsket høyde når du bruker Bigsby® B3, B6, B11, B30 eller B60 vibrato tailpiece.

TOWNER® B3 V BLOCK ADAPTER - ALUMINIUM

274,-

V.BLOCK er en brakettfor å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner adapter for remfestet. Dette følger med:  • TOWNER V.BLOCK • TOWNER Hinge Plate Adaptor  • One 2-1/2" Strap Button Screw • Four 1/2" 2-56 Screws • Four Felt Pads  • The TOWNER V.BLOCK is designed set the BIGSBY® spring cup back 1/2″ inch from butting up against the stop tailpiece stud. • The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece. The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.

TOWNER® B3 V BLOCK ADAPTER - GOLD

465,-

V.BLOCK er en brakettfor å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner adapter for remfestet. Dette følger med:  • TOWNER V.BLOCK • TOWNER Hinge Plate Adaptor  • One 2-1/2" Strap Button Screw • Four 1/2" 2-56 Screws • Four Felt Pads  • The TOWNER V.BLOCK is designed set the BIGSBY® spring cup back 1/2″ inch from butting up against the stop tailpiece stud. • The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece. The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.

TOWNER® B6 A-BLOCK ADAPTERKIT - GOLD

828,-

A-BLOCK er et komplett system for å kunne montere en Bigsby® B6 på en gitar med asymetrisk kropp som f.eks. Gibson Firebird . Settet har en asymetrisk alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B6 og boltene på Firebird. Settet har også Towner Down break angle adjustment bar og adapter for remfestet.   TOWNER A.BLOCK  TOWNER Down Tension Bar TOWNER Hinge Plate Adaptor  One 2″ Strap Button Screw Four 1/2″ 2-56 Screws Four Felt Pads   The TOWNER A.BLOCK provides a square surface to install the BIGSBY® on the asymmetrical guitar.   The TOWNER Down Tension Bar manages your sustain controlling your break angle.   The TOWNER Down Tension Bar allows you to control how much string tension you want.             – Recommended to set the Down Tension Bar just below the saddles of the bridge.    The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar. 

TOWNER® B6 A-BLOCK ADAPTERKIT - RUSTFRITT STÅL

548,-

A-BLOCK er et komplett system for å kunne montere en Bigsby® B6 på en gitar med asymetrisk kropp som f.eks. Gibson Firebird . Settet har en asymetrisk alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B6 og boltene på Firebird. Settet har også Towner Down break angle adjustment bar i rustfitt stål og adapter for remfestet.   TOWNER A.BLOCK  TOWNER Down Tension Bar TOWNER Hinge Plate Adaptor  One 2″ Strap Button Screw Four 1/2″ 2-56 Screws Four Felt Pads   The TOWNER A.BLOCK provides a square surface to install the BIGSBY® on the asymmetrical guitar.   The TOWNER Down Tension Bar manages your sustain controlling your break angle.   The TOWNER Down Tension Bar allows you to control how much string tension you want.             – Recommended to set the Down Tension Bar just below the saddles of the bridge.    The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar. 

TOWNER® B6 HINGE & PIN - ALUMINIUM

103,-

BIGSBY B6 Hinge plate and pin for thicker guitar bodies. *Will not work with the TOWNER Hinge Plate Adaptor.

TOWNER® B6 HINGE & PIN - GOLD

189,-

BIGSBY B6 Hinge plate and pin for thicker guitar bodies. *Will not work with the TOWNER Hinge Plate Adaptor.

TOWNER® STRING TENSION BAR - GOLD

451,-

Towner® String Tension Bar (STB) er et skrueløst system som festes på broboltene. Leveres med 2 selvklebende filtputer.   The TOWNER String Tension Bar helps to manage your guitars string tension for low bridge heights and sustain, recommended for guitar models with  frequensator tailpiece or trapeze tailpieces (NOT FOR USE WITH FLOATING BRIDGES).  For years, guitarists with trapeze setups have asked me to make a string tension bar to provide string tension because their bridge height and string setup have low action. The new TOWNER String Tension Bar provides the necessary tension to keep your strings in place.  Under the Tune-o-Matic, ABR-1 or Nashville bridge posts use  at least one pair of thumbwheels to firmly hold the string tension bar in place, SEE PHOTOS ABOVE in GALLERY. The reason for the 2 thumbwheels is to have one pair hold the STB in place and the other two to manage the height of the bridge.  The TOWNER String Tension Bar also works with Jazzmaster vibratos.   *NOT for use with floating bridges.  *EPIPHONE and other import Guitars: Since Epiphone has been inconsistent in the size of the bridge posts. You may have to widen the hole of the feet of the string tension bar to fit some bridge post widths. However, not ideal for gold plating.

TOWNER® 2" SCREW PACKAGE- CHROME

31,-

TOWNER 2 inch Screw Packet Includes: 2" Strap Button Screw 4 Rivets for Hinge Plate Dressing 4 Felt Pads TOWNER 2 inch Screw Packet - Choice of Silver and Brass (for gold plated hinge plates) Over the years we have found customers use different BIGSBY hinge plates where this little 2" screw packet can be helpful. We have the 2" screw head modified to fit all strap lock buttons and standard strap buttons.  The rivets included in the packet are to dress up the surrounding holes in the hinge plate, because you won't be drilling any extra holes in your guitar.     

TOWNER® 2" SCREW PACKAGE- GOLD

31,-

TOWNER 2 inch Screw Packet Includes: 2" Strap Button Screw 4 Rivets for Hinge Plate Dressing 4 Felt Pads TOWNER 2 inch Screw Packet - Choice of Silver and Brass (for gold plated hinge plates) Over the years we have found customers use different BIGSBY hinge plates where this little 2" screw packet can be helpful. We have the 2" screw head modified to fit all strap lock buttons and standard strap buttons.  The rivets included in the packet are to dress up the surrounding holes in the hinge plate, because you won't be drilling any extra holes in your guitar.     

TOWNER® HPA HINGE-PLATE ADAPTER - GOLD

106,-

Towner® Hinge Plate Adaptor med 2" (5,08cm) skrue. - One 2" Strap Button Screw - Four Rivets for Hinge Plate Dressing - Four Felt Pads  The Original! TOWNER Hinge Plate Adaptor  The TOWNER Hinge Plate Adaptor is designed to lift your strap lock or strap button above the slot on BIGSBY® B3 and BIGSBY® B7 EX-SHORT hinge plates for easier access to your strap lock or strap button.  Strap lock buttons such as SCHALLER STRAP Locks, DUNLOP Strap Locks and GROVER Strap Locks and strap buttons DO NOT FIT between the slot of the BIGSBY® B3 and BIGSBY® B7 hinge plates.   The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. For use with the BIGSBY® B3 and BIGSBY® B7 vibrato tailpieces.

TOWNER® Metrisk Standard Tailpiece Mounting Studs - GOLD

69,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Gold plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® Metriske Tailpiece Mounting Studs - KROM

61,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Chrome plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® Metriske Tailpiece Mounting Studs - NIKKEL

61,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Nickel plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® US Standard Tailpiece Mounting Studs - CHROME

61,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® US Standard Tailpiece Mounting Studs - GOLD

69,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Gold plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® US Standard Tailpiece Mounting Studs - NIKKEL

61,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® VINTAGE THIN TUMBWEELS - GOLD

106,-

Sett med 2 stk Towner® Vintage Thin ABR-1 Tumbweels i gold finish messing . Tykkelse: 2.06mm (Standard tumbweels er 2,76mm) Diameter: 16mm Gjenger: SAE 6-32 (US Spec)    

TOWNER® VINTAGE THIN TUMBWEELS - NICKEL

93,-

Sett med 2 stk Towner® Vintage Thin ABR-1 Tumbweels i forniklet messing . Tykkelse: 2.06mm (Standard tumbweels er 2,76mm) Diameter: 16mm Gjenger: SAE 6-32 (US Spec)  

Bigsby Chet Atkins 7 in. Replacement Handle kit - gold

790,-

Bigsby Chet Atkins 7 toms arm med festebrakett i gold finish. Genuine Bigsby® Chet Atkins complete handle assembly for use with Bigsby vibrato units. This assembly attaches to vibratos using the included set screw. Not compatible with Lightning Series vibratos

Vibramate Spoiler - svart

398,-

Vibramate® String Spoiler er en genial liten brakett designet til å passe rett på din eksisterende Bigsby® Vibrato uten modifikasjon eller behov for noe spesialverktøy. Braketten glir lett på plass og holdes i posisjon av spennet i strengene når du har stemt opp. Vibramate® String Spoiler gjør strengeskift på Bigsby® system så lekende lett at du vil undre deg over hvordan du har klart deg uten! Universell passform gjør at braketten kan brukes på samtlige Bigsby® modeller. Produsert i USA.

Vibramate Spoiler - gull

413,-

Vibramate® String Spoiler er en genial liten brakett designet til å passe rett på din eksisterende Bigsby® Vibrato uten modifikasjon eller behov for noe spesialverktøy. Braketten glir lett på plass og holdes i posisjon av spennet i strengene når du har stemt opp. Vibramate® String Spoiler gjør strengeskift på Bigsby® system så lekende lett at du vil undre deg over hvordan du har klart deg uten! Universell passform gjør at braketten kan brukes på samtlige Bigsby® modeller. Produsert i USA fra high grade rustfritt stål.

Vibramate Slottet Telecaster Saddle Set -Brass - Dual Access

481,-

Vibramate® Replacement saddle set in brass with dual access intonation screws.

Bigsby Bridge - krom

600,-

Standard Bigsby bridge i aluninium. Specifications E to E String Spacing, ctr to ctr of compensation : 2 3⁄64 in. (52mm) Post Hole Diameter : 5⁄32 in. (4mm) Post to post ctr to ctr spacing : 2 13⁄16 in. (71.5mm) Radius : 12 in. Material : Aluminum Compensation : for wound G string 4 + 2

Roller Bridge - gull

953,-

Tune-o-matic bridge med roller sadler med lav friksjon for lettere stemming og bruk av tremolo. Sadlene kan justeres for intonasjon i lengderetningen. Denne bridgen kan også brukes med standard Gibson tailpieces. Strengebredde E til E: 52,22 mm  Sadel radius: 12 tommer Avstand mellom monteringsbolter 73,82 mm Gjenger på studs: M5 fingjenget.  

Shaller Roller Bridge - krom

750,-

Schaller's egen versjon av Tune-o-matic bridge har roller sadler med lav friksjon for lettere stemming og bruk av tremolo. Sadlene kan justeres for intonasjon i lengderetningen og sideveis for tilpassing av avstand mellom strengene og total bredde fra E til E. Denne bridgen kan også brukes med standard Gibson tailpieces. Non-reverse, dvs. intonasjonsskruer viser mot pickup. Strengebredde E til E: 48,42 til 57,15 mm (justerbar) Sadel radius: 14 tommer Avstand mellom monteringsbolter 73,82 mm Gjenger på studs: M5 fingjenget.  

TOWNER® B3 LES PAUL VBLOCK ADAPTERKIT - GOLD

464,-

V.BLOCK er et komplet system for å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner Down break angle adjustment bar og adapter for remfestet.