Hopp til innhold

Norsk nettbutikk | Rask levering | Frakt i hele Norge

Hjem / Elektronikk / Potmeter

Potmeter

Hovedbilde Solidshaft

Solidshaft
Hovedbilde Splitshaft

Splitshaft
Hovedbilde AxLabs

AxLabs
Hovedbilde Bourns

Bourns
Hovedbilde Emerson

Emerson
Hovedbilde Fender

Fender
Hovedbilde Gibson

Gibson
Hovedbilde Minipotmeter

Minipotmeter
Hovedbilde Mojotone

Mojotone
Hovedbilde Potmeter med switch

Potmeter med switch
Hovedbilde Tilbehør

Tilbehør
Hovedbilde Andre typer

Andre typer
Hovedbilde MEC

MEC
Hovedbilde Killswitch Potmeter - 250K Hovedbilde Killswitch Potmeter - 250K
Killswitch Potmeter - 250K

169,-

Kill Pot 250 KOhm for singlecoil mikrofoner. Spesialdesignet 250K LOG (Audiotaper) Split Shaft potmeter med innebygd heavy duty fjærbelastet push switch som bryter signalet når du trykker på potmeteret. Muliggjør rask "stuttering" uten elektroniske "knepp" eller kortslutningsstøy. Lengde på gjenget bøssing: 16mm
Hovedbilde MEC potmeter 100K LIN DPDT Hovedbilde MEC potmeter 100K LIN DPDT
MEC potmeter 100K LIN DPDT

200,-

MEC 100k lin mono On/On DPDT push/pull switch. Modell M 87100. Brukes av bl.a. Warwick på aktiv tonekontroll. Spesifikasjoner:  mono potentiometer with push/pull switch  single shaft  B100K (resistance 100 kOhm, (B) linear)  On/On DPDT  suitable for use as tone control for active pickups  M10 x 0.75 mm threads  mounting diameter 10 mm  thread length 9 mm  solid shaft  shaft length 11 mm  shaft diameter 6 mm  incl. nut and washer  dimensions incl. lugs (L x W x H) 24 x 16 x 16 mm
Hovedbilde MEC potmeter 220K REV LOG
MEC potmeter 220K REV LOG

100,-

MEC 250K REV LOG split shaft potmeter med M7 bøssing. Modell M 83250-15C Bøssing lengde: 9mm. Skaft diameter: 6mm. Brukes av bl.a. Warwick.
Hovedbilde MEC potmeter 500K LIN
MEC potmeter 500K LIN

138,-

MEC 500k LIN. Modell M 85500 Bøssing lengde: 9mm. Skaft diameter: 6mm. Brukes av bl.a. Warwick.
Hovedbilde MEC potmeter tone 220K LOG
MEC potmeter tone 220K LOG

100,-

MEC 250K LOG split shaft potmeter med M7 bøssing. Modell M 82252 Bøssing lengde: 9mm. Skaft diameter: 6mm. Brukes av bl.a. Warwick.
Hovedbilde MEC potmeter vol 220K LIN
MEC potmeter vol 220K LIN

100,-

MEC 250K LIN split shaft potmeter med M7 bøssing. Modell M 82250  Bøssing lengde: 9mm. Skaft diameter: 6mm. Brukes av bl.a. Warwick.
Hovedbilde MEC potmeter vol 220K LOG
MEC potmeter vol 220K LOG

100,-

MEC 250K LOG split shaft potmeter med M7 bøssing. Modell M 82251  Bøssing lengde: 9mm. Skaft diameter: 6mm. Brukes av bl.a. Warwick.
Hovedbilde MEC potmeter vol LIN 500K med switch Hovedbilde MEC potmeter vol LIN 500K med switch
MEC potmeter vol LIN 500K med switch

219,-

MEC 500k lin mono med switch. Brukes av bl.a. Sandberg - mono push/pull potentiometer - single shaft - B500K (resistance 500 kOhm, (B) linear) - On/On DPDT - pre-fitted with MEC M 84001 PCB module - suitable for use as volume control for active pickups - solderless JST R4 2.5 mm connector - M10 x 0.75 mm threads - mounting diameter 10 mm - thread length 9 mm - solid shaft - shaft length 11 mm - shaft diameter 6 mm - incl. nut and washer - dimensions incl. lugs (L x W x H) 24 x 22 x 22 mm
Hovedbilde Potmeter m DPDT push push switch 250K - US gjenget
Potmeter m DPDT push push switch 250K - US gjenget

74,-

250K Audiotaper (LOG) potmeter med DTDP push push switch for f-eks. coil tapping, fasevending eller split funksjoner.Proff kvaliltet. Passer ikke metriske knotter men originale US knotter (Gibson/Fender). Viktige mål: 9mm gjengediameter 9mm lengde på gjenget skaft 26mm monteringsdybde (under plekterplate) 47mm total dybde
Hovedbilde Støvhette i gummi for 16 mm potmeter Hovedbilde Støvhette i gummi for 16 mm potmeter
Støvhette i gummi for 16 mm potmeter

9,-

Sort støvdeksel i myk gummi for bruk på 16mm potentiometer (minipotmeter). Dekslene presses på baksiden av potmeteret og hjelper mot inntrenging av støv ved å dekke hull/åpninger i potmeterhuset. 
Hovedbilde Støvhette i gummi for 24mm potmeter Hovedbilde Støvhette i gummi for 24mm potmeter
Støvhette i gummi for 24mm potmeter

10,-

Sort støvdeksel i myk gummi for bruk på 24mm potentiometer (standard størrelse i gitarer/basser). Dekslene presses på baksiden av potmeteret og hjelper mot inntrenging av støv ved å dekke hull/åpninger i potmeterhuset. 
Hovedbilde Emerson Premium PRO potmeter splitshaft 1MEG
Emerson Premium PRO potmeter splitshaft 1MEG

123,-

Emerson Custom Premium Potentiometer - 1Meg, Short Split Shaft TAPER: AUDIO TAPER (20% PROPRIETARY EMERSON DESIGN) (20% OUTPUT @ ½ ROTATION) OHM VALUE: 1 MEG Ω TOLERANCE: +/- 8% TOLERANCE (920K - 1080K Ω) SHAFT LENGTH: 0.375” (9,5mm) FOR USE ON PICKGUARDS, CONTROL PLATES, AND THIN WOOD TOPS) SHAFT STYLE: SPLIT (FINE KNURLING - 24 SPLINE - FOR US SPEC CTS STYLE PUSH ON KNOBS) INCLUDED HARDWARE: 1 FLAT WASHER, 1 LOCK WASHER, 1 MOUNTING NUT PRODUCT NOTE: WORKS GREAT IN JAZZMASTERS OR OTHER SETUP THAT NEEDS A 1MEG SPLIT SHAFT POT. (FOR PUSH-ON KNOBS) New for 2024!  The new Emerson pots are finally here. After 3 years of development, testing and research we are proud to announce the launch of the guitar pot we’ve always wanted to offer, but couldn’t… until now!   The Emerson PREMIER PRO Pot. These completely new PREMIER PRO pots were designed by the founder and owner Mitch Ingram along with tons of help and technical knowledge from Jon Erickson at Tonecraft Audio. We have been offering our spec’d line of “Emerson PRO CTS pots” for many years, but when 2020 rolled around and supply chain disruptions created lead-times 20x the norm, it became clear that it was time to take matters into our own hands.  Mitch was tired of accepting the industry norm that CTS pots are “good enough” or the “best” available and set out to create his own design and brand of in-house pots. The PREMIER PRO pots not only look familiar but are built with an incredibly consistent feel and function from lot to lot. It took a truckload of money, time and effort, but we believe that these new Emerson PREMIER PRO pots are the best guitar pots available… PERIOD.   Unconstrained by an off the shelf menu of factory options, we designed and developed these pots from the ground up.  We put extra care into all the fine details.  Ideal taper, torque and tolerance is meticulously built-in and our unique lugs are designed specifically for point to point assembly; slightly oversized with plenty of room to run ground wires/buss wires and any other connection you need.  We chose a robust Fiberglass substrate that the solder lugs and resistive track are mounted to.  This material is exceptionally strong and won’t easily bend and snap like those in many other pots. The taper we used is a custom 20% Audio Taper and a proprietary design from Emerson.  This taper works equally as well in the volume position as it does in the tone position.   We designed and built the PREMIER PRO line of pots to be exceptionally rugged and reliable for the fine guitars they will function in.  Emerson appreciates the support of players, builders and distributors around the world.  We are proud to always push the levels of quality and craftmanship alongside you.  
Hovedbilde Potmeter 50K CGE Audiotaper
Potmeter 50K CGE Audiotaper

23,-

50K audiotaper potmeter fra CGE i USA.. 24mm diameter på hus. 9,5mm diameter på bøssing. 9,5mm skaftlengde. 24 tagger hode. 20% toleranse (Bildet viser 25K) Measurements: Diameter= 24mm Bushing Threads = 3/8-32 Resistance: 50 kohm Taper: Audio Taper Shaft: Split Shaft (24 Tooth) Bushing Length: Standard Bushing 3/8 in.
Hovedbilde Potmeter 100K LIN CGE mini Hovedbilde Potmeter 100K LIN CGE mini
Potmeter 100K LIN CGE mini

25,-

100K lineær pot for elektronikk (f.eks. aktive instrument og pedaler) Measurements: Diameter= 16mm Bushing Threads = M8 Shaft: Split Shaft (18 Tooth) Bushing Length: Standard Bushing 9,5mm
Hovedbilde Låseskive for små potmeter
Låseskive for små potmeter

1,-

Låseskive til små potmeter. (USA: 3/8 in. Metric: 8 mm) Passer f.eks. de rimeligste potmeterne våre og Alpha potmeter som sitter i de fleste gitarer produsert i Østen. Pris er pr stk.
Hovedbilde AxLabs 250K Solidshaft 1/4 toms potmeter Hovedbilde AxLabs 250K Solidshaft 1/4 toms potmeter
AxLabs 250K Solidshaft 1/4 toms potmeter

105,-

  High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction. Lastly, a nickel-plated steel housing was used for the ease of gripping solder as well as the classic, high-end look of vintage pots. Features: Classic mounting 3/8”x32 thread 3/8” mounting hole diameter required Includes necessary nuts and washers Solid shaft knob fit is ¼” Specifications: Total Resistance = Less than ± 20% Insulation Resistance: More than 50MΩ Withstand voltage: 250V AC per 1 minute Operating force: Less than ± 10%~ -30% for initial operating force
Hovedbilde Fender® Control 100K Snap-In Hovedbilde Fender® Control 100K Snap-In
Fender® Control 100K Snap-In

38,-

Originalt Fender® "Snap-In" 100K B Taper 14 toms Solid Shaft Potentiometer for '65 Deluxe Reverb®, Blues Deluxe™/DeVille™, Hot Rod Deluxe™/DeVille™, Bassman® 300, '65 Super Reverb®, Pro Tube Series, '65 Twin®, '65 Princeton®, Princeton Recording Amp, '94 Twin®, og Sunn® T50 models.
Hovedbilde Fender® Control 25K Snap-In
Fender® Control 25K Snap-In

38,-

Originalt Fender® "Snap-In" 25K B Taper Linear 1/4" Solid Shaft Potentiometer for Blues Deluxe/DeVille, '94 Twin, Bassman 300, Pro Tube Twin, Pro Tube Concert, Hot Rod Deluxe/DeVille og Bassman TV Amplifiers
Hovedbilde Fender® Control 50K Snap-In
Fender® Control 50K Snap-In

31,-

Originalt Fender® "Snap-In" potmeter LIN 50K med D-skaft for X-15, Bullet Amp, Bronco™, Princeton® 112+, RAD, JAM, Automatic GT™, Acoustasonic™ Jr./Jr. DSP/30 DSP/Ultralight, Blues Junior™, Princeton 65 DSP/650, og Jazzmaster Ultralight™ forsterkere produsert fra og med 1990.
Hovedbilde AxLabs 250K LIN - 18 tagger Hovedbilde AxLabs 250K LIN - 18 tagger
AxLabs 250K LIN - 18 tagger

86,-

High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and coarse (T18) knurled shaft (Epiphone m.fl. - ikke Gibson)  The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction. Lastly, a nickel-plated steel housing was used for the ease of gripping solder as well as the classic, high-end look of vintage pots. Features: Classic mounting 3/8”x32 thread 3/8” mounting hole diameter required Includes necessary nuts and washers Split knurl fits 15/64” press fit knobs (classic knobs from major guitar brands since the birth of electric guitars) Specifications: Total Resistance = Less than ± 20% Insulation Resistance: More than 50MΩ Withstand voltage: 250V AC per 1 minute Operating force: Less than ± 10%~ -30% for initial operating force   Body Diameter 24.6 mm Body Height 9.1 mm Bushing Length 6.5 mm Bushing Threading ⅜”-32 Flat Washer Inner Diameter 10.2 mm Flat Washer Outer Diameter 16 mm Lock Washer Inner Diameter 10.4 mm Lock Washer Outer Diameter 18 mm Lock Washer Thickness 1 mm Nut Thickness 2.4 mm Nut Width 12.5 mm Rotation Angle 260° Shaft Diameter 6 mm Shaft Length 6 mm
Hovedbilde Mutter for jack og potmeter - gull
Mutter for jack og potmeter - gull

3,-

Gull mutter til jack chassi med US gjenger som for eksempel Switchcraft. Passer også US potmeter fra CTS og CGE. Passer ikke metriske chassis eller potmeter. Pris er pr stk. Tommemål: "3/8-32 1/2"" 
Hovedbilde Potmeter solidshaft 50K REVERSE LOG Hovedbilde Potmeter solidshaft 50K REVERSE LOG
Potmeter solidshaft 50K REVERSE LOG

19,-

Reverse (Left Hand) Audiotaper 50K Potmeter. Låseskive og stoppskive følger med. Viktige mål: Total pot dybde - 30,5mm Lengde på gjenget bøssing - 10mm Bøssing diameter - 9,5mm Skaft diameter - 6mm Potmeterhus diameter - 23,7mm
Hovedbilde AxLabs 250K LOG - lang type - 18 tagger Hovedbilde AxLabs 250K LOG - lang type - 18 tagger
AxLabs 250K LOG - lang type - 18 tagger

86,-

High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and coarse (T18) knurled shaft (Epiphone m.fl. - ikke Gibson). The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction. Lastly, a nickel-plated steel housing was used for the ease of gripping solder as well as the classic, high-end look of vintage pots. Features: Classic mounting 3/8”x32 thread 3/8” mounting hole diameter required Includes necessary nuts and washers Split knurl fits 15/64” press fit knobs (classic knobs from major guitar brands since the birth of electric guitars) Specifications: Total Resistance = Less than ± 20% Insulation Resistance: More than 50MΩ Withstand voltage: 250V AC per 1 minute Operating force: Less than ± 10%~ -30% for initial operating force Bushing Length = 9.5 mm
Hovedbilde Potmeter 500K mini - splitshaft Hovedbilde Potmeter 500K mini - splitshaft
Potmeter 500K mini - splitshaft

18,-

500K minipotmeter fra Alpha. LOG Audiotaper. Metriske gjenger. Kort bøssing. 16mm diameter potmeterhus. Measurements: Diameter= 16mm Bushing Threads = M8 0.75 Resistance: 500 kohm Taper:Audio Taper Bushing Length: Short Bushing 1/4 in.
Hovedbilde Potmeter Bourns VINTAGE 500K - LOG Hovedbilde Potmeter Bourns VINTAGE 500K - LOG
Potmeter Bourns VINTAGE 500K - LOG

239,-

Model 82 Bourns Audiotaper (LOG) 500K potmeter med kort bøssing. 18 spline skaft, lukket hus 10% toleranse. US spec. bushing   Important Specs and Dimensions: This Vintage 82 series pot has the internal ground and is designed for usage on guitars with a +/- 10% tolerance. Important Notice: Please do not confuse this Vintage Bourns guitar potentiometer with the less expensive (but visually similar) version other parts suppliers are stocking. The lesser version is not intended for usage on a guitar and has a floating shaft with no internal ground which can result in excessive noise as it is designed for panel usage and not instrument usage and has a 20% tolerance. Make sure you get the Bourns 82 Series Vintage pots for your instrument!
Hovedbilde Potmeter m DPDT switch 250K - metrisk
Potmeter m DPDT switch 250K - metrisk

133,-

250K Audiotaper (Log) potmeter med Push Pull DTDP switch for f-eks. coil tapping, fasevending eller split funksjoner.Proff kvaliltet. Passer metriske knotter med 18 tagger. Leveres med to muttere, låseskive og stoppskive. Ved bruk av ratt med settskrue anbefales konverteringshylse splitshaft-solidshaft.  Viktige mål: 7,2 mm gjengediameter (M7) 9,5mm lengde på gjenget skaft 29mm monteringsdybde (under plekterplate) 47mm total dybde

Om oss

Meny

Nyhetsbrev

  • vipps-orange.png
  • klarna-dark.png
  • mastercard-full.png
  • visa.png
Dette nettstedet bruker informasjonskapsler for å fungere korrekt, analysere trafikk, personalisering av annonser og annonsering.
Juster innstillingene