Bøssing for JM/JG/MG broer

19,-

Bøssingsett (2 stk) fra Hosco i Japan for stabilisering av bridge på Jazzmaster, Jaguar og Mustang gitarer.  Many Jazzmaster, Jaguar, and Mustang guitars with traditional “rocking” bridges have encountered issues such as limited sustain, strings slipping from the saddles and tuning instability during vibrato use. These problems are often caused by the amount of movement between the bridge post and the oversized anchor holes - something that was always inherent of the original design. The Hosco fixing bushes solve this by attaching easily to the bridge feet with a simple push-in fit - no modification to the original body is required. By increasing the diameter of the bridge feet, the rocking motion is limited within the anchor posts, significantly improving tuning stability when using the vibrato arm. Depending on the specific bridge model or the alignment of the pickguard, a minor adjustment may be needed — such as lightly sanding the edge of the bushing or cutting a small slit to slightly enlarge the fit. The bushings are made from POM (Polyoxymethylene), a durable engineering plastic known for its strength, low friction, and excellent stability. It's easy to work with using basic tools, making any required fitting adjustments quick and hassle-free.  

Göldo Adapterbøssing for Jazzmaster 9mm

101,-

Sett med to 9mm til M4 konverteringsbøssinger som lar deg montere en tune-o-matic bro på Jazzmaster eller tilsvarende. Passer For mounting tunomatic, roller and other bridges standing on M4 grub screws. Suitable for most offset guitars of all ages, e.g. Fender® Jazzmaster, whose original bushings have a diameter of 9mm. There are some Asian offset versions with a diameter of 8mm; here please use our smaller adapter sleeves (HJM8N)! Simply insert the HJM9N into the existing bushing and install a good Tunomatic or Roller bridge with the necessary accessories (see below) - and the typical problems of a Jazzmaster bridge are a thing of the past. This means that the strings no longer jump from the riders, the tone becomes fuller, the attack more direct and the sustain longer.  In addition, the mounting threads in the bushings are eccentrically positioned so that the bridge can be precisely adjusted by simply turning the threaded bushings. Unique on the market! It comes in a set of 2!  Required accessories: Grub screws (HW25B), knurled washers (HW2RN) and the selected bridge.  Outer diameter: 9mm Installation depth: 14,5mm  Thread dimension: M4

Göldo Tune-O-Matic studs 4mm

33,-

Sett med 2 stk 25mm lange M4 studs for montering i Göldo Tune-O-Matic adapterbøssinger. Skrues inn med en 2mm sekskantnøkkel (Unbraco) 

Göldo Tune-O-Matic tommelhjul M4

35,-

Sett med 2 stk M4 tommehjul til M4 studs for montering i Göldo Tune-O-Matic adapterbøssinger.