TOWNER® DOWN TENSION BAR - RUSTFRITT STÅL

226,-

Towner® Down Tension Bar (DTB) er et skrueløst system som festes på Stop-Tail boltene. DTB gir V.S.T. [Variable String Tension] og lar deg kontrollere binkelen på strengene mellom bridge og og Bigsby ved å justere boltene til ønsket høyde når du bruker Bigsby® B3, B6, B11, B30 eller B60 vibrato tailpiece.

TOWNER® DOWN TENSION BAR - GOLD

339,-

Towner® Down Tension Bar (DTB) er et skrueløst system som festes på Stop-Tail boltene. DTB gir V.S.T. [Variable String Tension] og lar deg kontrollere binkelen på strengene mellom bridge og og Bigsby ved å justere boltene til ønsket høyde når du bruker Bigsby® B3, B6, B11, B30 eller B60 vibrato tailpiece.

TOWNER® B3 V BLOCK ADAPTER - ALUMINIUM

274,-

V.BLOCK er en brakettfor å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner adapter for remfestet. Dette følger med:  • TOWNER V.BLOCK • TOWNER Hinge Plate Adaptor  • One 2-1/2" Strap Button Screw • Four 1/2" 2-56 Screws • Four Felt Pads  • The TOWNER V.BLOCK is designed set the BIGSBY® spring cup back 1/2″ inch from butting up against the stop tailpiece stud. • The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece. The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.

TOWNER® B3 V BLOCK ADAPTER - GOLD

465,-

V.BLOCK er en brakettfor å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner adapter for remfestet. Dette følger med:  • TOWNER V.BLOCK • TOWNER Hinge Plate Adaptor  • One 2-1/2" Strap Button Screw • Four 1/2" 2-56 Screws • Four Felt Pads  • The TOWNER V.BLOCK is designed set the BIGSBY® spring cup back 1/2″ inch from butting up against the stop tailpiece stud. • The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece. The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.

TOWNER® B6 A-BLOCK ADAPTERKIT - GOLD

828,-

A-BLOCK er et komplett system for å kunne montere en Bigsby® B6 på en gitar med asymetrisk kropp som f.eks. Gibson Firebird . Settet har en asymetrisk alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B6 og boltene på Firebird. Settet har også Towner Down break angle adjustment bar og adapter for remfestet.   TOWNER A.BLOCK  TOWNER Down Tension Bar TOWNER Hinge Plate Adaptor  One 2″ Strap Button Screw Four 1/2″ 2-56 Screws Four Felt Pads   The TOWNER A.BLOCK provides a square surface to install the BIGSBY® on the asymmetrical guitar.   The TOWNER Down Tension Bar manages your sustain controlling your break angle.   The TOWNER Down Tension Bar allows you to control how much string tension you want.             – Recommended to set the Down Tension Bar just below the saddles of the bridge.    The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar. 

TOWNER® B6 A-BLOCK ADAPTERKIT - RUSTFRITT STÅL

548,-

A-BLOCK er et komplett system for å kunne montere en Bigsby® B6 på en gitar med asymetrisk kropp som f.eks. Gibson Firebird . Settet har en asymetrisk alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B6 og boltene på Firebird. Settet har også Towner Down break angle adjustment bar i rustfitt stål og adapter for remfestet.   TOWNER A.BLOCK  TOWNER Down Tension Bar TOWNER Hinge Plate Adaptor  One 2″ Strap Button Screw Four 1/2″ 2-56 Screws Four Felt Pads   The TOWNER A.BLOCK provides a square surface to install the BIGSBY® on the asymmetrical guitar.   The TOWNER Down Tension Bar manages your sustain controlling your break angle.   The TOWNER Down Tension Bar allows you to control how much string tension you want.             – Recommended to set the Down Tension Bar just below the saddles of the bridge.    The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate. The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. The TOWNER Hinge Plate Adaptor and 2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar. 

TOWNER® B6 HINGE & PIN - ALUMINIUM

103,-

BIGSBY B6 Hinge plate and pin for thicker guitar bodies. *Will not work with the TOWNER Hinge Plate Adaptor.

TOWNER® B6 HINGE & PIN - GOLD

189,-

BIGSBY B6 Hinge plate and pin for thicker guitar bodies. *Will not work with the TOWNER Hinge Plate Adaptor.

TOWNER® STRING TENSION BAR - GOLD

451,-

Towner® String Tension Bar (STB) er et skrueløst system som festes på broboltene. Leveres med 2 selvklebende filtputer.   The TOWNER String Tension Bar helps to manage your guitars string tension for low bridge heights and sustain, recommended for guitar models with  frequensator tailpiece or trapeze tailpieces (NOT FOR USE WITH FLOATING BRIDGES).  For years, guitarists with trapeze setups have asked me to make a string tension bar to provide string tension because their bridge height and string setup have low action. The new TOWNER String Tension Bar provides the necessary tension to keep your strings in place.  Under the Tune-o-Matic, ABR-1 or Nashville bridge posts use  at least one pair of thumbwheels to firmly hold the string tension bar in place, SEE PHOTOS ABOVE in GALLERY. The reason for the 2 thumbwheels is to have one pair hold the STB in place and the other two to manage the height of the bridge.  The TOWNER String Tension Bar also works with Jazzmaster vibratos.   *NOT for use with floating bridges.  *EPIPHONE and other import Guitars: Since Epiphone has been inconsistent in the size of the bridge posts. You may have to widen the hole of the feet of the string tension bar to fit some bridge post widths. However, not ideal for gold plating.

TOWNER® 2" SCREW PACKAGE- CHROME

31,-

TOWNER 2 inch Screw Packet Includes: 2" Strap Button Screw 4 Rivets for Hinge Plate Dressing 4 Felt Pads TOWNER 2 inch Screw Packet - Choice of Silver and Brass (for gold plated hinge plates) Over the years we have found customers use different BIGSBY hinge plates where this little 2" screw packet can be helpful. We have the 2" screw head modified to fit all strap lock buttons and standard strap buttons.  The rivets included in the packet are to dress up the surrounding holes in the hinge plate, because you won't be drilling any extra holes in your guitar.     

TOWNER® 2" SCREW PACKAGE- GOLD

31,-

TOWNER 2 inch Screw Packet Includes: 2" Strap Button Screw 4 Rivets for Hinge Plate Dressing 4 Felt Pads TOWNER 2 inch Screw Packet - Choice of Silver and Brass (for gold plated hinge plates) Over the years we have found customers use different BIGSBY hinge plates where this little 2" screw packet can be helpful. We have the 2" screw head modified to fit all strap lock buttons and standard strap buttons.  The rivets included in the packet are to dress up the surrounding holes in the hinge plate, because you won't be drilling any extra holes in your guitar.     

TOWNER® HPA HINGE-PLATE ADAPTER - GOLD

106,-

Towner® Hinge Plate Adaptor med 2" (5,08cm) skrue. - One 2" Strap Button Screw - Four Rivets for Hinge Plate Dressing - Four Felt Pads  The Original! TOWNER Hinge Plate Adaptor  The TOWNER Hinge Plate Adaptor is designed to lift your strap lock or strap button above the slot on BIGSBY® B3 and BIGSBY® B7 EX-SHORT hinge plates for easier access to your strap lock or strap button.  Strap lock buttons such as SCHALLER STRAP Locks, DUNLOP Strap Locks and GROVER Strap Locks and strap buttons DO NOT FIT between the slot of the BIGSBY® B3 and BIGSBY® B7 hinge plates.   The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®. For use with the BIGSBY® B3 and BIGSBY® B7 vibrato tailpieces.

TOWNER® Metrisk Standard Tailpiece Mounting Studs - GOLD

69,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Gold plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® Metriske Tailpiece Mounting Studs - KROM

61,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Chrome plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® Metriske Tailpiece Mounting Studs - NIKKEL

61,-

2 stk Towner Metriske Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Most studs (other than Gibson's stock studs) have wider neck posts and are METRIC. Sold as a pair Metric tailpiece mounting studs Made in the USA Nickel plated steel studs Mounting studs with METRIC M8 x 1.25 threads Fits many import(Asian) guitars(ie, Epiphone) Overall Length is 1 3/8" and threaded section is slightly under 7/8" Fits tailpiece with ears thickness of 5/16"(8mm) and under(please check before ordering)  

TOWNER® US Standard Tailpiece Mounting Studs - CHROME

61,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® US Standard Tailpiece Mounting Studs - GOLD

69,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Gold plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® US Standard Tailpiece Mounting Studs - NIKKEL

61,-

2 stk US Spec Tailpiece bolter To fit the cuffs on the TOWNER Down Tension Bar, the stop tailpiece studs should be no wider than 0.260 inches at the neck (see "G" in image below). Gibson's Memphis Reissue Guitars have a wider neck posts width and are US Standard threads. Sold as a pair Imperial Thread Plated steel studs Mounting studs (U.S. SAE 5/16 - 24)  Same size as what is currently used by Gibson Overall Length 1 7/16" ( 36.2mm) Threaded section length 7/8" (22mm) Fits tailpiece with ears thickness of 5/16" (8mm) and under  

TOWNER® VINTAGE THIN TUMBWEELS - GOLD

106,-

Sett med 2 stk Towner® Vintage Thin ABR-1 Tumbweels i gold finish messing . Tykkelse: 2.06mm (Standard tumbweels er 2,76mm) Diameter: 16mm Gjenger: SAE 6-32 (US Spec)    

TOWNER® VINTAGE THIN TUMBWEELS - NICKEL

93,-

Sett med 2 stk Towner® Vintage Thin ABR-1 Tumbweels i forniklet messing . Tykkelse: 2.06mm (Standard tumbweels er 2,76mm) Diameter: 16mm Gjenger: SAE 6-32 (US Spec)  

TOWNER® B3 LES PAUL VBLOCK ADAPTERKIT - GOLD

464,-

V.BLOCK er et komplet system for å kunne montere en Bigsby® B3 på en Gibson Les Paul®. Settet har en 1/2 toms alublokk som gir den nødvendige avstanden mellom mellom fjærplaten på B3 og boltene på Les Paul. Settet har også Towner Down break angle adjustment bar og adapter for remfestet.